top of page

Water filters explained: in-line, under-sink, reverse osmosis and whole-house

Writer: Szymon Wielinski
Szymon Wielinski
Nov 14
3 min read

Water filters range from a jug in the fridge to a unit on the incoming main that treats every tap in the house. They do different jobs, and no single filter removes everything. This guide explains the main types fitted to the mains, what each is good at, and what to check before you choose one.

In-line and under-sink filters

An in-line or under-sink filter sits in the cupboard under the kitchen sink and treats the water going to one tap: either a separate filter tap or a three-way tap that also gives hot and cold. Most use activated carbon, which reduces the taste and smell of chlorine and some organic chemicals. Some cartridges are also certified to reduce lead.

  • Best for: better-tasting water for drinking and cooking.

  • Space: a small housing under the sink and one tap hole in the sink or worktop.

  • Upkeep: a new cartridge at the interval the manufacturer sets, typically every six to twelve months.

Reverse osmosis

A reverse osmosis (RO) system pushes water through a very fine membrane, after sediment and carbon pre-filters. It removes most dissolved substances, including minerals, nitrate, fluoride and sodium. The DWI points out the drawbacks: RO sends 20 to 30% of the incoming water to drain, can reduce the flow at the tap, and strips out minerals, so adding minerals back is recommended for drinking water. The DWI suggests RO only for specialist domestic uses.

  • Best for: very low-mineral water, or removing a specific substance that carbon does not.

  • Needs: a drain connection, a storage tank or pump, and regular changes of filters and membrane.

Whole-house and whole-flat filters

A whole-house filter, also called a point-of-entry filter, is fitted on the incoming main near the stopcock, so every tap, shower and appliance gets filtered water. Most combine a sediment stage, which catches particles from old mains and pipework, with a carbon stage for chlorine. Some add a scale-reduction stage.

  • Best for: sediment or discoloured water, chlorine smell in the shower, and protecting appliances.

  • Needs: space by the incoming main, a bypass so you keep water during cartridge changes, and a unit sized for your flow rate.

What filters do not do

  • They are not needed to make tap water safe. The DWI says there is no need to install additional treatment at home as a health protection measure.

  • A carbon filter does not soften water. Removing hardness needs a softener or reverse osmosis.

  • A filter is not a substitute for replacing lead pipes. It reduces lead at one tap; replacement removes the source.

Upkeep matters

The DWI warns that carbon filters stop working if cartridges are not changed on time, and may then release chemicals or bacteria back into the water. A neglected unit can become a breeding ground for bacteria. Plan cartridge changes from the day the filter is fitted.

Certification and the rules

  • Look for independent certification for the claim that matters to you. NSF/ANSI 42 covers aesthetic effects such as chlorine taste and odour, NSF/ANSI 53 covers health-related contaminants such as lead, NSF/ANSI 58 covers reverse osmosis systems and NSF/ANSI 401 covers emerging contaminants. Certification is given contaminant by contaminant, so check the listing for the exact substance.

  • Anything connected to the mains must comply with regulation 4 of the Water Supply (Water Fittings) Regulations 1999, and the DWI recommends having it fitted by a qualified plumber.

Guide prices

Supplied and fitted, before we see the job. Every home is different, so the exact price comes after a survey visit.

  • In-line or under-sink filter with its own filter tap: typically £250 to £500.

  • Reverse osmosis system: typically £550 to £1,000.

  • Whole-house or whole-flat filter on the incoming main: typically £900 to £2,000.

Replacement cartridges and membranes depend on the model.

Choosing the right filter

Start with what you want to solve: taste, lead, sediment or limescale. Our guide to what is in tap water and the legal limits is a good place to begin. We then visit (£150), check your water and pipework, and send a written quotation. See our water filters and softeners service or book a survey visit.

 
 
 

Comments


bottom of page