top of page

Room-by-room heating control for larger homes: TRVs, smart valves and zones

Writer: Szymon Wielinski
Szymon Wielinski
Nov 10
3 min read

In a large detached house in Ashley Park, Burwood Park or Fairmile, rooms are used in very different ways. A home office needs to be warm from eight in the morning, guest bedrooms may sit empty for weeks, and a kitchen extension with big glass doors behaves nothing like a snug at the back of the house. A single thermostat in the hall cannot get all of that right. Room-by-room control can, and it usually makes a house both more comfortable and cheaper to run.

Thermostatic radiator valves (TRVs)

A TRV is the numbered head on the side of a radiator. It senses the temperature of the room and closes the valve when the room reaches the setting you chose.

  • The numbers are a target temperature, not a speed. Turning a TRV to 5 does not heat the room faster; it just lets it get warmer before the valve closes.

  • Exact temperatures vary by manufacturer, but setting 3 is usually around 20°C.

  • The room with your main wall thermostat is normally left without a TRV, or with the valve fully open, so the two controls do not fight each other.

  • Old TRVs can stick shut over the summer. If a radiator stays cold, the pin under the head may need freeing or the valve replacing.

Smart radiator valves

Smart radiator valves are battery-powered heads that replace standard TRV heads, usually without draining the system. Each room gets its own schedule, so the office can warm up at 7.30 on weekdays while the spare rooms stay at a background temperature. They work with smart heating systems such as Drayton Wiser, Honeywell evohome and tado, and are controlled from a phone app.

They suit larger homes because you can bring rooms up to temperature only when they are used, and see which rooms are calling for heat.

Heating zones

A zone is part of the house with its own thermostat and its own motorised valve, such as upstairs and downstairs, a self-contained annex, or a large extension. Building Regulations guidance for new heating systems expects homes with more than 150 m² of floor space to have at least two separately controlled heating zones, and many large homes in KT11 and KT12 benefit from three or more.

Zones and smart valves work well together: the zone valve controls whole floors, and the smart heads fine-tune individual rooms.

Underfloor heating

Underfloor heating already has a thermostat in each room, which switches its own circuit at the manifold. If some rooms feel slow or uneven, the manifold usually needs balancing or servicing. See our guide to underfloor heating cleaning, servicing and new systems.

When you replace the boiler

Since 2022, the Building Regulations have asked for room-by-room temperature control, such as TRVs, to be fitted when a boiler is replaced, where it is practical. A boiler replacement is the ideal time to add zones, smart controls and weather compensation, because the system is drained and the controls are being rewired anyway. Our guide to smart thermostats and weather compensation explains how those controls lower running costs.

Balance the system first

Controls cannot fix a system that is out of balance. If radiators near the boiler are hot and those furthest away are lukewarm, the system needs balancing, and sometimes a clean. Read about bleeding and balancing radiators and the signs that a system needs a power flush.

Ask us about your home

We fit TRVs, smart radiator valves, zone valves and smart controls in homes across Walton-on-Thames, Hersham, Whiteley Village, Burwood Park, Cobham and Stoke d'Abernon. Call or WhatsApp 07719 664615, or get in touch.

 
 
 

Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.
bottom of page